This robust Buna-N O-ring, crafted from premium Aluminum 6061, ensures reliable sealing in demanding industrial environments. Its precise dimensions provide a tight, leak-proof fit for critical fluid and gas containment.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 2.009" |
| Outside Diameter | 8.646" |
| Cross Section | 0.109" |
Manufactured under strict quality controls, this Buna-N industrial O-ring boasts a precise Inside Diameter of 2.009 inches, an Outside Diameter of 8.646 inches, and a Cross Section of 0.109 inches. The Buna-N (Nitrile Butadiene Rubber) material offers excellent resistance to oils, fuels, and many hydraulic fluids, making it ideal for applications involving petrochemicals, automotive systems, and general industrial machinery. The Aluminum 6061 housing provides structural integrity and moderate corrosion resistance, suitable for moderate environmental exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly machined. 2. Carefully stretch or compress the O-ring to fit within the groove, avoiding excessive force or twisting. 3. Verify the O-ring is seated evenly and without pinching before assembling the mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, which can cause the O-ring to extrude or be crushed. | Tighten fasteners to the manufacturer's recommended torque specifications, using a torque wrench. |
| Using incompatible cleaning agents that degrade the Buna-N material. | Clean mating surfaces and the O-ring with mild soap and water or a compatible solvent recommended for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic actuators, Fuel and oil lines, General industrial machinery sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||