This industrial O-ring, crafted from durable Buna-N with nylon reinforcement, ensures reliable sealing. Its precise dimensions provide a secure fit in a wide range of mechanical systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 7.058" |
| Outside Diameter | 9.724" |
| Cross Section | 0.190" |
Manufactured under strict quality controls, this Buna-N O-ring features an inside diameter of 7.058 inches, an outside diameter of 9.724 inches, and a 0.190-inch cross-section. The Buna-N (Nitrile Butadiene Rubber) material offers excellent resistance to petroleum-based oils, greases, and hydraulic fluids, making it ideal for demanding industrial environments. The integrated nylon reinforcement enhances its tensile strength and dimensional stability, preventing extrusion under pressure and extending its service life in dynamic sealing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and damage. 2. Carefully stretch the O-ring over the shaft or into the groove, avoiding excessive force or sharp tools. 3. Ensure the O-ring is properly seated and forms a continuous seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears in the O-ring. | Stretch the O-ring gently and avoid using sharp objects. Consider using an O-ring lubricant approved for the application. |
| Installing the O-ring in a dirty or damaged groove. | Thoroughly clean the groove and ensure it is free from debris or sharp edges that could compromise the seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic cylinders, Automotive seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||