This industrial O-ring, constructed from durable Buna-N and housed in an Aluminum 6061 carrier, ensures reliable sealing. Precisely manufactured to specified dimensions for critical fluid and gas containment.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 0.254" |
| Outside Diameter | 6.473" |
| Cross Section | 0.236" |
Built to exacting engineering tolerances, this Buna-N O-ring features an Inside Diameter of 0.254 inches, an Outside Diameter of 6.473 inches, and a Cross Section of 0.236 inches. The Buna-N material provides excellent resistance to oils, fuels, and hydraulic fluids, while the Aluminum 6061 carrier offers superior strength and corrosion resistance, making it ideal for moderate pressure and temperature applications. This combination ensures a secure and long-lasting seal in various industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean and free of debris. 2. Carefully compress the O-ring to fit within the designated groove. 3. Verify the O-ring is seated uniformly and without twists.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently ease the O-ring into the groove, avoiding excessive stretching which can lead to premature failure. |
| Using an O-ring of incorrect size. | Always confirm the O-ring's dimensions (ID, OD, CS) match the groove specifications precisely. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic equipment, Fluid transfer lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||