Engineered for superior sealing, this Buna-N industrial O-ring provides robust performance in challenging operational settings. Its precise dimensions ensure reliable containment of fluids and gases, preventing leaks and maintaining system integrity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 0.131" |
| Outside Diameter | 8.961" |
| Cross Section | 0.217" |
Designed for demanding industrial environments, this Buna-N (Nitrile) O-ring exhibits excellent resistance to oils, fuels, hydraulic fluids, and many common chemicals, making it ideal for a wide range of sealing applications. With an inside diameter of 0.131 inches, an outside diameter of 8.961 inches, and a cross-section of 0.217 inches, this component is manufactured to stringent tolerances. Its inherent flexibility and resilience allow it to conform effectively to sealing surfaces, providing a dependable barrier against leakage under moderate pressure and temperature conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, free of debris, and smooth. 2. Carefully lubricate the O-ring and sealing groove with a compatible lubricant. 3. Gently install the O-ring, avoiding any stretching or twisting, ensuring it sits flush within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, which can deform the O-ring and lead to premature failure. | Tighten fasteners to the manufacturer's recommended torque specifications, ensuring proper compression without overstressing the O-ring. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult material compatibility charts and use only lubricants and cleaning agents specifically approved for Buna-N applications. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic equipment, Fuel and oil handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||