This industrial-grade Buna-N O-ring, constructed with a robust carbon steel core, offers superior sealing performance. Engineered for reliability in demanding applications, ensuring leak-free operation.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 7.115" |
| Outside Diameter | 1.685" |
| Cross Section | 0.078" |
Manufactured under strict quality controls, this Buna-N O-ring features a precise inside diameter of 7.115 inches, an outside diameter of 1.685 inches, and a critical cross-section of 0.078 inches. The carbon steel core provides enhanced structural integrity and resistance to deformation under pressure. Buna-N (Nitrile Butadiene Rubber) offers excellent resistance to oils, fuels, hydraulic fluids, and general chemicals, making this O-ring suitable for a wide range of industrial sealing challenges.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and damage. 2. Carefully install the O-ring into the designated groove, ensuring no twisting or stretching. 3. Verify proper seating and compression of the O-ring within the groove before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or deformation. | Apply gentle, even pressure during installation. Utilize appropriate tools if necessary to avoid direct contact with sealing surfaces. |
| Incorrect O-ring size selection for the groove, resulting in improper sealing or premature failure. | Always verify O-ring dimensions against groove specifications and application requirements. Consult dimensional charts and application guides. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic systems, Automotive seals, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||