Engineered for reliability, this Buna-N O-ring features a robust carbon steel core for enhanced structural integrity. It provides a secure seal in critical industrial fluid and gas systems.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.523" |
| Outside Diameter | 9.945" |
| Cross Section | 0.118" |
A high-performance industrial component, this Buna-N O-ring is precisely manufactured with an inside diameter of 7.523 inches, an outside diameter of 9.945 inches, and a cross-section of 0.118 inches. The Buna-N (Nitrile Butadiene Rubber) material offers excellent resistance to petroleum-based oils, hydraulic fluids, and fuels, while the carbon steel construction provides superior rigidity and resistance to deformation under pressure. This combination makes it ideal for applications requiring a durable and reliable seal in environments with moderate temperatures and exposure to common industrial lubricants.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free from debris. 2. Carefully stretch the O-ring over the component, avoiding any sharp edges or excessive force. 3. Position the O-ring squarely within the groove to ensure even compression upon assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation, leading to premature failure. | Handle the O-ring with care, using appropriate tools if necessary, and ensure it is only stretched to the minimum extent required for installation. |
| Installing the O-ring into a dirty or damaged groove. | Thoroughly inspect and clean the mating groove before O-ring installation to prevent leaks and damage. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic cylinders, Fuel delivery systems, Oil and gas equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||