This high-performance Buna-N O-ring, featuring a robust carbon steel construction, provides exceptional sealing integrity. Precisely manufactured to critical dimensions, it ensures leak-free operation in diverse industrial applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 5.756" |
| Outside Diameter | 8.463" |
| Cross Section | 0.075" |
Specified by design engineers worldwide, this industrial O-ring is fabricated from premium Buna-N (Nitrile Rubber) for superior resistance to oils, fuels, and hydraulic fluids. The carbon steel carrier provides structural integrity and chemical inertness in demanding applications. With a precise inside diameter of 5.756 inches, an outside diameter of 8.463 inches, and a cross-section of 0.075 inches, this seal is engineered for tight tolerances and reliable performance in static and dynamic sealing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring within its groove, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant if necessary to facilitate installation and ensure proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing O-ring extrusion. | Adhere to specified torque values for fasteners to prevent excessive compression. |
| Using incompatible cleaning agents that degrade the Buna-N material. | Consult the material compatibility chart and use only approved cleaning solutions. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic assemblies, Automotive fluid seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||