This industrial O-ring, crafted from Buna-N and housed within a durable carbon steel retainer, provides exceptional sealing performance in challenging environments. Its robust construction ensures reliable fluid containment and pressure resistance.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 0.490" |
| Outside Diameter | 5.893" |
| Cross Section | 0.233" |
Specified by design engineers worldwide, this Buna-N O-ring boasts an Inside Diameter of 0.490 inches, an Outside Diameter of 5.893 inches, and a Cross Section of 0.233 inches. The Buna-N (Nitrile Butadiene Rubber) material offers excellent resistance to oils, fuels, and many hydraulic fluids, making it suitable for a wide range of industrial applications. The integrated carbon steel offers superior structural integrity and resistance to extrusion under high pressure conditions. This combination ensures long-term sealing integrity and operational reliability in static and dynamic sealing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from burrs or debris. 2. Carefully inspect the O-ring for any signs of damage prior to installation. 3. Install the O-ring into its designated groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion or compression set. | Follow specified torque values for fasteners. Avoid excessive force during assembly. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult material compatibility charts. Use only approved lubricants and cleaning agents specified for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic cylinders, Fuel and oil handling equipment, Automotive seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||