Engineered for reliability, this Buna-N O-ring, featuring a brass construction, offers robust sealing for general industrial applications. Its precise dimensions ensure effective containment and prevent leaks in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 6.453" |
| Outside Diameter | 2.367" |
| Cross Section | 0.167" |
A proven choice for industrial professionals, this Buna-N O-ring is meticulously manufactured to exacting tolerances. With an inside diameter of 6.453 inches, an outside diameter of 2.367 inches, and a cross-section of 0.167 inches, it provides a precise seal. The Buna-N (Nitrile) material offers excellent resistance to oils, fuels, and many hydraulic fluids, making it suitable for a wide range of static and dynamic sealing applications. The brass material imparts corrosion resistance and durability for extended service life in various industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free of debris. 2. Carefully compress the O-ring into its groove, avoiding stretching or twisting. 3. Verify proper seating and no signs of damage before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently guide the O-ring into its groove without excessive pulling or twisting to maintain its original dimensions and sealing integrity. |
| Installing on dirty or damaged sealing surfaces. | Thoroughly clean and inspect mating surfaces for any nicks, burrs, or contaminants that could compromise the seal or damage the O-ring. |
A: This Industrial O-Ring, Buna-N is manufactured from Brass.
A: Hydraulic systems, Pneumatic equipment, General machinery seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||