This industrial O-ring, crafted from durable Buna-N, features a brass fitting for enhanced chemical resistance and secure mounting. Engineered for reliable sealing in demanding environments, it ensures leak-free performance.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 5.693" |
| Outside Diameter | 9.877" |
| Cross Section | 0.189" |
Precision-manufactured to tight tolerances, this Buna-N O-ring boasts an Inside Diameter of 5.693 inches, an Outside Diameter of 9.877 inches, and a Cross Section of 0.189 inches. The Buna-N (Nitrile Butadiene Rubber) material offers excellent resistance to oils, fuels, and general chemicals, making it suitable for a wide range of industrial fluid power and control systems. The integrated brass fitting provides robust corrosion resistance and facilitates secure integration into manifold or housing designs. Its dimensional stability ensures consistent sealing force and longevity under operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean sealing surfaces thoroughly to remove debris and contaminants. 2. Lightly lubricate the O-ring with a compatible lubricant to prevent tearing during installation. 3. Carefully install the O-ring into its designated groove, ensuring it is seated evenly and without twists.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade Buna-N. | Always use a lubricant specifically recommended for Buna-N seals and the application's fluid media. |
| Forcing the O-ring during installation, leading to cuts or nicks. | Gently guide the O-ring into its groove, using a non-metallic tool if necessary, and ensuring the groove geometry is correct. |
A: This Industrial O-Ring, Buna-N is manufactured from Brass.
A: Hydraulic systems, Pneumatic equipment, Fuel and oil handling, Chemical processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||