This industrial O-ring, crafted from resilient Buna-N and featuring a brass housing, ensures exceptional sealing in demanding environments. Its precise dimensions provide reliable performance and longevity.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 5.607" |
| Outside Diameter | 10.854" |
| Cross Section | 0.124" |
A high-performance industrial component, this Buna-N O-ring is engineered for superior sealing performance within a brass housing. The precise dimensions of a 5.607" inside diameter, 10.854" outside diameter, and a 0.124" cross-section ensure a tight, reliable seal against fluids and gases. Buna-N (Nitrile Butadiene Rubber) offers excellent resistance to petroleum-based oils, hydraulic fluids, water, and moderate abrasion, making it a robust choice for general industrial sealing, automotive applications, and hydraulic systems where compatibility with these media is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove or mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring within the designated groove, avoiding stretching or twisting. 3. Apply a thin, compatible lubricant if recommended for the specific application to facilitate proper seating and prevent damage during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently guide the O-ring into the groove without excessive elongation to maintain its sealing integrity and prevent premature failure. |
| Using incompatible lubricants or sealants. | Always consult material compatibility charts and use only lubricants or sealants specifically approved for Buna-N and the operating fluid. |
A: This Industrial O-Ring, Buna-N is manufactured from Brass.
A: Hydraulic systems, Pneumatic assemblies, Automotive fuel systems, General industrial sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||