This industrial O-ring, constructed from durable Buna-N and featuring brass components, provides reliable sealing for a wide range of applications. Its precise dimensions ensure a tight, leak-proof fit.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 4.683" |
| Outside Diameter | 9.003" |
| Cross Section | 0.090" |
Manufactured under strict quality controls, this Buna-N O-ring boasts an Inside Diameter of 4.683 inches, an Outside Diameter of 9.003 inches, and a Cross Section of 0.090 inches. The Buna-N (Nitrile Butadiene Rubber) material offers excellent resistance to oils, fuels, hydraulic fluids, and general wear, making it suitable for moderate temperature and pressure applications. The brass housing ensures compatibility with specific fluid systems and offers good corrosion resistance in non-aggressive environments. This combination provides a robust and cost-effective sealing solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, dry, and free from burrs. 2. Lightly lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the designated groove, avoiding excessive stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade Buna-N. | Always consult compatibility charts and use lubricants specifically approved for Buna-N and the operating environment. |
| Over-stretching or twisting the O-ring during installation. | Install the O-ring gently, ensuring it seats properly without deformation to maintain its sealing integrity. |
A: This Industrial O-Ring, Buna-N is manufactured from Brass.
A: General industrial fluid sealing, Hydraulic and pneumatic systems, Automotive and machinery components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||