This industrial O-ring features superior Buna-N sealing performance within a robust brass retainer. Engineered for high-pressure environments, it ensures reliable, leak-free operation in critical fluid and gas systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 6.160" |
| Outside Diameter | 3.883" |
| Cross Section | 0.107" |
Precision-manufactured to tight tolerances, this Buna-N O-ring boasts an inside diameter of 6.160", an outside diameter of 3.883", and a cross-section of 0.107". The Buna-N (Nitrile Butadiene Rubber) material offers excellent resistance to petroleum-based oils, fuels, and hydraulic fluids, making it suitable for a wide range of industrial applications. The integrated brass component provides enhanced structural integrity and corrosion resistance, ideal for environments where metallic support is beneficial. This combination ensures long service life and dependable sealing under challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully position the O-ring within its designated groove, ensuring no twisting or stretching. 3. Apply light lubrication compatible with Buna-N if necessary to facilitate seating and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening of fasteners leading to overcompression and premature seal failure. | Adhere to specified torque values for mating components to prevent excessive compression of the O-ring. |
| Using incompatible lubricants that degrade Buna-N material. | Consult chemical compatibility charts to select lubricants specifically approved for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Brass.
A: Hydraulic systems, Pneumatic actuators, Fuel and oil handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||