This industrial O-ring, crafted from robust Buna-N material and featuring a Brass fitting, provides exceptional sealing performance in a wide array of demanding environments. Its precise dimensions ensure a reliable and long-lasting seal.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 2.313" |
| Outside Diameter | 10.224" |
| Cross Section | 0.248" |
Specified by design engineers worldwide, this Buna-N O-ring is engineered for critical sealing applications. With an inside diameter of 2.313 inches, an outside diameter of 10.224 inches, and a precise cross-section of 0.248 inches, it offers superior resilience and chemical resistance to oils, fuels, and hydraulic fluids. The integrated Brass fitting ensures secure and corrosion-resistant integration within mating components, making it suitable for moderate pressure systems and environments where material compatibility is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring within the designated groove, avoiding excessive stretching or twisting. 3. Apply a light lubricant compatible with Buna-N if necessary for easier assembly, then seat the O-ring firmly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring deformation or damage. | Install with moderate pressure, ensuring the O-ring seats correctly without being pinched or stretched beyond its elastic limit. |
| Incorrect O-ring size selection for the groove or mating component. | Verify all dimensions (ID, OD, cross-section) against the application's groove specifications and mating part geometry before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Brass.
A: Hydraulic systems, Pneumatic equipment, Fuel and oil handling, Automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||