This industrial O-ring, constructed from robust Buna-N and featuring brass fittings, is engineered for exceptional sealing in demanding environments. Its precise dimensions ensure a secure, leak-proof fit for critical fluid and gas containment.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 5.964" |
| Outside Diameter | 1.711" |
| Cross Section | 0.155" |
Purpose-built for heavy-duty applications, this Buna-N industrial O-ring with brass components offers superior resistance to oils, fuels, and hydraulic fluids, making it ideal for pumps, valves, and pneumatic systems. The precise dimensions of a 5.964" inside diameter, 1.711" outside diameter, and 0.155" cross-section are critical for achieving a reliable seal under significant pressure and temperature variations, ensuring operational integrity and minimizing downtime in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, dry, and free from debris. 2. Carefully install the O-ring into the designated groove, avoiding stretching or twisting. 3. Apply a light, compatible lubricant if necessary to facilitate installation and proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| O-ring is twisted or stretched during installation. | Install the O-ring carefully, ensuring it sits flat within the groove without undue tension or distortion. |
| Groove surfaces are contaminated or damaged. | Thoroughly clean and inspect the groove for any nicks, burrs, or debris that could compromise the seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Brass.
A: Hydraulic Systems, Pneumatic Actuators, Fluid Power Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||