This industrial O-ring features a durable Buna-N elastomer encapsulated within a robust brass housing. Engineered for exceptional sealing performance, it provides reliable containment in a wide range of fluid and gas systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.835" |
| Outside Diameter | 10.144" |
| Cross Section | 0.236" |
Trusted by engineers across multiple sectors, this Buna-N O-ring offers superior resistance to petroleum-based oils, hydraulic fluids, and water. The precisely machined brass housing ensures dimensional stability and corrosion resistance, critical for applications requiring long-term integrity. With an Inside Diameter of 1.835", an Outside Diameter of 10.144", and a 0.236" cross-section, it is designed for optimal compression and sealing in dynamic and static applications where chemical compatibility and physical robustness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean and degrease both the O-ring and the groove it will be installed in. 2. Lightly lubricate the O-ring with a compatible lubricant to facilitate installation and prevent tearing. 3. Carefully place the O-ring into the groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incompatible lubricant. | Always verify lubricant compatibility with Buna-N elastomer and the system media to prevent premature degradation. |
| Twisting or stretching the O-ring during installation. | Install the O-ring by gently rolling or pushing it into the groove to maintain its intended shape and sealing properties. |
| Installing in a dirty or damaged groove. | Ensure the groove is clean, free of debris, and has no sharp edges or damage that could compromise the O-ring's seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Brass.
A: Hydraulic systems, Pneumatic equipment, Oil and gas exploration, Chemical processing, Automotive fluid systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||