This high-performance industrial O-ring, crafted from Buna-N and housed in Aluminum 6061, offers exceptional sealing integrity. Its precise dimensions ensure a leak-proof fit in critical applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.228" |
| Outside Diameter | 3.955" |
| Cross Section | 0.072" |
Engineered for reliability and performance, this Buna-N O-ring features a precise Inside Diameter of 9.228 inches, an Outside Diameter of 3.955 inches, and a Cross Section of 0.072 inches. The robust Aluminum 6061 housing provides excellent corrosion resistance and structural support, making it suitable for moderate temperature and pressure applications where chemical compatibility with oils, fuels, and certain solvents is paramount. Its inherent resilience ensures long-term sealing performance in dynamic and static systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully compress the O-ring to fit within the groove, avoiding excessive stretching or twisting. 3. Verify the O-ring is seated evenly and without damage before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the gland, which can deform the O-ring and lead to premature failure. | Follow recommended gland compression specifications for the specific application and material. |
| Using damaged or improperly sized O-rings, resulting in leaks or seal compromise. | Inspect O-rings for nicks, cuts, or excessive wear before installation and ensure correct dimensions are used. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic actuators, Fuel and oil lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||