This 3" brass U-bolt provides secure and corrosion-resistant support for piping systems. Precision-engineered with a 2.33" inside width and 5.31" inside length, it ensures a tight fit and long-lasting performance.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 2.33" |
| Inside Length ( B) | 5.31" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this U-bolt is manufactured from high-quality brass, offering superior corrosion resistance ideal for marine, chemical, and other demanding environments. The precise dimensions of 2.33" inside width (A) and 5.31" inside length (B) are optimized for secure clamping around a 3-inch nominal pipe size. The robust 1/2"-13 UNC thread size ensures compatibility with standard nuts and washers for a dependable assembly, capable of withstanding significant loads and environmental stresses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring the threaded legs extend evenly on either side. 2. Place the pipe and U-bolt assembly onto the support structure, aligning the legs with pre-drilled holes or mounting surface. 3. Secure the U-bolt by threading nuts onto the legs, tightening them progressively and evenly to achieve firm contact without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrect U-bolt size selection leading to loose or overly tight clamping. | Always verify the nominal pipe size and consult the U-bolt's inside dimensions (A and B) to ensure a proper fit. |
| Failure to use appropriate washers, resulting in uneven load distribution and potential damage to the pipe or support. | Utilize flat washers under each nut to distribute the clamping force evenly across the U-bolt legs and the mounting surface. |
A: This Brass U-Bolt, 3" Pipe is manufactured from Brass.
A: Marine piping systems, Chemical processing pipelines, General pipe support and anchoring, Plumbing and HVAC installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||