Engineered from premium brass, this U-bolt offers superior corrosion resistance for 3-inch pipe support. Its robust construction and precise dimensions ensure secure and long-lasting installations in demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 3.65" |
| Inside Length ( B) | 5.70" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this Brass U-Bolt is meticulously manufactured to accommodate 3-inch nominal pipe sizes. It features an internal width (A) of 3.65 inches and an internal length (B) of 5.70 inches, providing ample clearance and secure clamping. The robust 1/2"-13 UNC threading ensures compatibility with standard nuts and washers, facilitating a strong and reliable connection. The inherent properties of brass, including excellent corrosion resistance and non-sparking characteristics, make it ideal for marine, chemical processing, and plumbing applications where material integrity and safety are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring the pipe is centered within the curved section. 2. Place a flat washer on each leg of the U-bolt, followed by a lock washer (if applicable). 3. Thread the corresponding nuts onto each leg of the U-bolt, tightening them evenly and securely against the mounting surface. 4. Periodically check and re-tighten nuts to maintain optimal clamping force, especially after initial installation or in applications with vibration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Selecting a U-bolt with insufficient inside width for the pipe's outer diameter. | Always verify the pipe's actual outer diameter and select a U-bolt with an inside width that provides a snug fit without excessive compression. |
| Over-tightening the nuts, which can deform the pipe or the U-bolt itself. | Tighten nuts until snug and secure. Use a torque wrench to apply the recommended torque for the thread size and application, if specified. |
| Using standard steel U-bolts in corrosive environments where brass is required. | Ensure the material selection aligns with the environmental conditions. Brass offers superior corrosion resistance compared to standard steel in many aggressive media. |
A: This Brass U-Bolt, 3" Pipe is manufactured from Brass.
A: Marine pipe support, Chemical processing equipment plumbing, Plumbing and HVAC systems in corrosive environments, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||