This robust Brass U-Bolt is precisely engineered to secure 2" diameter pipes. Its superior brass construction offers exceptional corrosion resistance, ensuring long-lasting performance in demanding environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 3.12" |
| Inside Length ( B) | 4.46" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this Brass U-Bolt is manufactured from high-grade brass, providing excellent resistance to corrosion and chemical degradation, ideal for potable water systems and corrosive fluid transport. The U-bolt features an inside width (A) of 3.12 inches and an inside length (B) of 4.46 inches, designed to accommodate standard 2-inch nominal pipe sizes. Each leg is threaded with a 1/2"-13 UNC thread, allowing for secure fastening with appropriate nuts and washers, ensuring a stable and secure pipe mounting solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it sits flush against the mounting surface. 2. Thread the nuts onto the U-bolt legs until snug, applying even pressure. 3. Tighten the nuts incrementally and alternately to achieve the desired clamping force, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size U-bolt for the pipe diameter. | Verify the pipe's nominal diameter and select a U-bolt with matching inside dimensions. For 2" pipe, ensure the inside width is sufficient. |
| Over-tightening the nuts, which can deform the pipe or the U-bolt. | Tighten nuts gradually and alternately, using a torque wrench if specified by system requirements, to prevent damage. |
A: This Brass U-Bolt, 2" Pipe is manufactured from Brass.
A: Plumbing and Water Systems, Marine and Offshore Environments, Chemical Processing and Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||