This high-quality brass U-bolt is engineered for secure pipe support in corrosive environments. Featuring precise dimensions and durable brass construction, it ensures reliable and long-lasting performance.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 2.10" |
| Inside Length ( B) | 3.33" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this brass U-bolt is manufactured to exacting standards for critical applications. The material, solid brass (typically UNS C36000 or equivalent), offers exceptional resistance to corrosion, particularly in marine, chemical processing, and plumbing systems where ferrous metals would degrade. The inside width (A) is precisely 2.10 inches, accommodating a nominal 2-inch pipe diameter (OD approx. 2.375"). The inside length (B) is 3.33 inches, providing ample clearance for pipe insulation or coatings. The thread size is a robust 1/2"-13 UNC, ensuring secure fastening with standard nuts and washers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it is seated correctly within the saddle or support. 2. Thread the nuts onto the U-bolt legs, applying initial finger pressure to snug them. 3. Tighten the nuts alternately and evenly to the specified torque, ensuring the pipe is held securely without deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong U-bolt size for the pipe diameter | Always verify the nominal pipe size and select a U-bolt with an inside width that accommodates it, accounting for any insulation or coatings. |
| Over-tightening the U-bolt, causing pipe deformation | Tighten nuts incrementally and alternately to the recommended torque specification to avoid damaging the pipe or its contents. |
| Using standard steel U-bolts in corrosive environments | Select brass U-bolts for applications involving saltwater, chemicals, or high humidity to prevent premature corrosion and failure. |
A: This Brass U-Bolt, 2" Pipe is manufactured from Brass.
A: Marine piping systems, Chemical processing plants, Plumbing and water treatment, Industrial fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||