This 2" Brass U-Bolt provides robust and corrosion-resistant support for pipe systems. Manufactured with high-grade brass, it ensures long-term integrity and reliable performance in challenging environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.02" |
| Inside Length ( B) | 5.83" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this Brass U-Bolt is precision-machined for a secure and reliable pipe connection. With an Inside Width (A) of 1.02 inches and an Inside Length (B) of 5.83 inches, it is specifically designed to accommodate 2-inch nominal pipe size. The 1/2"-13 UNC thread size offers substantial load-bearing capacity. The inherent corrosion resistance of brass makes this U-bolt ideal for applications involving moisture, saltwater, or other corrosive agents, ensuring extended service life and preventing premature failure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and the supporting structure. 2. Thread the nuts onto the bolt legs, ensuring even engagement on both sides. 3. Tighten the nuts progressively and evenly to secure the pipe without over-stressing the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nuts, which can deform the pipe or the U-bolt. | Tighten nuts gradually and evenly, using a torque wrench if specifications are available, to achieve a secure fit without excessive force. |
| Using the wrong size U-bolt for the pipe, leading to a loose or damaging fit. | Always verify the nominal pipe size and ensure the U-bolt's inside dimensions (Width and Length) are appropriate for the specific pipe. |
A: This Brass U-Bolt, 2" Pipe is manufactured from Brass.
A: Marine pipe support, Plumbing in corrosive environments, Chemical processing equipment, Industrial fluid transfer systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||