This robust Brass U-Bolt is engineered for secure pipe support in demanding environments. Its superior corrosion resistance and precise dimensions ensure long-lasting, reliable performance for 2" nominal pipe sizes.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Width ( A) | 3.24" |
| Inside Length ( B) | 5.68" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this U-Bolt is fabricated from high-grade brass, offering exceptional resistance to corrosion and galvanic degradation, crucial for marine, chemical processing, and plumbing applications. The internal dimensions are precisely machined to 3.24 inches (A) for inside width and 5.68 inches (B) for inside length, ensuring a snug and secure fit around a 2-inch nominal pipe. The threaded ends feature a standard 1/2"-13UNC thread size, allowing for versatile fastening with compatible nuts and washers. This material choice and dimensional accuracy guarantee structural integrity and longevity in challenging service conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring the pipe is centered within the curve. 2. Thread the nuts onto the U-bolt legs, engaging at least three full threads. 3. Tighten the nuts evenly and incrementally, alternating between sides, until the desired clamping force is achieved and the pipe is firmly secured.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the U-bolt nuts. | Overtightening can deform the pipe or the U-bolt, leading to premature failure. Tighten until snug and then apply an additional quarter to half turn for most applications. Use a torque wrench if specified. |
| Using the wrong size U-bolt for the pipe. | Always verify the nominal pipe size and compare it against the U-bolt's inside dimensions. A mismatch can lead to loose support or damage to the pipe. |
| Not using washers. | Washers distribute the clamping load and prevent the nut from digging into the U-bolt surface, which can weaken the connection. Always use appropriate washers with the nuts. |
A: This Brass U-Bolt, 2" Pipe is manufactured from Brass.
A: Marine pipe support, Chemical processing equipment, Plumbing and water systems, Horticultural applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||