This high-grade brass stock sheet is engineered for critical lubricating applications. Its specific alloy composition ensures superior wear resistance and low friction, making it ideal for demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.356" |
| Length | 42" |
| Width | 17" |
A proven choice for industrial professionals, this brass stock sheet is manufactured to precise tolerances for optimal performance in lubricating systems. With a thickness of 0.356 inches, a length of 42 inches, and a width of 17 inches, it provides ample material for fabricating wear pads, bushings, and sliding components. The inherent properties of brass, including its excellent machinability, corrosion resistance, and low coefficient of friction, are further enhanced in this specific alloy formulation to minimize wear and heat generation in high-stress contact points.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, smooth, and free of contaminants. 2. Precisely cut the brass sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component to the intended application, ensuring proper alignment and contact pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass where a lubricating grade is required. | Always select lubricating grade brass for components experiencing sliding friction to prevent premature wear and seizing. |
| Inadequate surface preparation of mating components. | Thoroughly clean and deburr all mating surfaces to ensure smooth operation and prevent abrasive wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces and bushings, Wear plates and guides, Lubricated sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||