This high-performance lubricating brass stock sheet offers exceptional wear resistance and low friction. Its precise dimensions make it ideal for custom fabricated components requiring self-lubricating properties in demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.132" |
| Length | 42" |
| Width | 30" |
A high-performance industrial component, this brass stock sheet is engineered for applications demanding reduced friction and enhanced wear characteristics. Composed of a specialized brass alloy, it possesses inherent self-lubricating properties that minimize the need for external lubricants, extending component lifespan and reducing maintenance cycles. The precise dimensions of 0.132 inches (3.35 mm) thickness, 42 inches (1067 mm) length, and 30 inches (762 mm) width ensure suitability for a wide array of manufacturing processes, including precision machining, stamping, and forming. Its ductility and machinability facilitate the creation of complex geometries for bearings, bushings, and sliding surfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free from debris. 2. Precisely cut or machine the brass stock to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component in its intended operational position, verifying alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass where lubricating properties are critical. | Select lubricating grade brass specifically for applications requiring self-lubrication and reduced wear. |
| Inadequate surface preparation before machining. | Thoroughly clean and degrease the brass stock before any machining operations to prevent tool contamination and ensure dimensional accuracy. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guides, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||