This premium lubricating brass stock sheet offers exceptional wear resistance and self-lubricating properties. Precisely manufactured to exacting standards, it's engineered for demanding applications requiring reduced friction and extended component life.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.262" |
| Length | 38" |
| Width | 25" |
Manufactured under strict quality controls, this brass stock sheet boasts a precise thickness of 0.262 inches, a substantial length of 38 inches, and a width of 25 inches. Its composition as a lubricating grade brass ensures inherent self-lubricating properties, crucial for reducing wear and friction in dynamic mechanical systems. This material is selected for its excellent machinability, corrosion resistance, and ability to perform reliably under moderate load and speed conditions, making it ideal for bushings, bearings, and sliding components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free from debris. 2. Cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the brass component to its intended application, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-friction applications. | Always specify lubricating grade brass for components designed to minimize friction and wear. |
| Improperly cleaning mating surfaces before installation. | Thoroughly clean all contact surfaces to prevent premature wear and ensure optimal lubrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bushings and Bearings, Wear Plates, Sliding Components, Low-Friction Guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||