This high-performance brass stock sheet is engineered for lubricating applications. Its superior machinability and inherent low friction properties make it ideal for components requiring smooth operation and wear resistance.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.397" |
| Length | 41" |
| Width | 33" |
Built to exacting engineering tolerances, this brass stock sheet offers a precise thickness of 0.397 inches (10.1 mm), a substantial length of 41 inches (1041 mm), and a generous width of 33 inches (838 mm). Composed of a specific brass alloy optimized for reduced friction and excellent wear characteristics, it exhibits good thermal conductivity and corrosion resistance. This material is designed for applications where minimizing friction and ensuring smooth movement are paramount, such as in bearings, bushings, and sliding mechanisms.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the intended mating surfaces are clean and free of debris. 2. Accurately cut or machine the brass sheet to the required dimensions. 3. Install the fabricated component, ensuring proper alignment and clearance for optimal performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy instead of a lubricating grade. | Specify and procure a brass alloy specifically designed for lubricating properties to ensure reduced friction and enhanced wear resistance. |
| Inadequate surface preparation of mating components. | Thoroughly clean and deburr all mating surfaces to prevent premature wear and ensure smooth operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Journal bearings, Bushings and sleeves, Wear plates and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||