This lubricating grade brass stock sheet offers exceptional wear resistance and self-lubricating properties. Its substantial thickness and generous dimensions make it suitable for fabricating robust components requiring reduced friction and extended service life in heavy-duty applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.944" |
| Length | 47" |
| Width | 30" |
A high-performance industrial component, this brass stock sheet is engineered for applications demanding superior lubricity and wear resistance. Measuring a precise 0.944 inches in thickness, 47 inches in length, and 30 inches in width, it is manufactured from a specialized brass alloy known for its excellent bearing characteristics and inherent self-lubricating qualities. This material composition minimizes friction and wear, making it an ideal substrate for bushings, bearings, wear plates, and sliding components in machinery operating under moderate to heavy loads and requiring minimal lubrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area for installation is clean and free from contaminants. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component to the mating surface, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass where self-lubricating properties are critical. | Select a designated lubricating grade brass for applications requiring reduced friction and wear. |
| Insufficient material thickness for the intended load-bearing application. | Verify that the 0.944" thickness is adequate for the operational loads to prevent premature failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bushings and bearings, Wear plates for sliding mechanisms, Components in automated machinery requiring self-lubrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||