This robust brass stock sheet is engineered for the rigorous demands of pneumatic systems. Its precise dimensions and high-quality brass composition ensure exceptional performance and longevity in critical applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.592" |
| Length | 17" |
| Width | 14" |
A high-performance industrial component, this brass stock sheet is manufactured to exacting standards for pneumatic applications. With a substantial thickness of 0.592 inches, a generous length of 17 inches, and a width of 14 inches, it offers significant material for fabrication. The inherent properties of brass, including excellent machinability, good corrosion resistance against common industrial fluids, and non-sparking characteristics, make it an ideal substrate for custom manifold blocks, valve bodies, and pressure containment components within pneumatic circuits. Its dimensional stability ensures reliable sealing and consistent performance under varying pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Precisely cut the brass sheet to the required component dimensions using appropriate machining tools. 3. Deburr all edges to prevent contamination and ensure proper sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools leading to burring and material deformation. | Utilize high-quality carbide or HSS cutting tools specifically designed for brass, and maintain sharp edges to minimize burrs. |
| Failure to properly degrease and clean the surface before machining or assembly. | Thoroughly clean the brass surface with a suitable industrial degreaser to remove any oils, lubricants, or contaminants that could affect machining or bonding. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Pneumatic Manifold Fabrication, Pneumatic Valve Body Machining, Pressure Vessel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||