This brass stock sheet offers superior durability and corrosion resistance, ideal for custom pneumatic components. Its precise dimensions ensure consistent performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.031" |
| Length | 26" |
| Width | 22" |
Engineered for reliability and performance, this brass stock sheet features a material composition optimized for pneumatic systems, providing excellent machinability and resistance to common industrial fluids. With a precise thickness of 0.031 inches, a generous length of 26 inches, and a width of 22 inches, it is perfectly suited for fabricating custom fittings, valve components, and manifold plates. The inherent ductility of brass allows for intricate shaping, while its non-sparking properties enhance safety in potentially hazardous environments. This material ensures long-term operational integrity within pneumatic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended area of the brass sheet thoroughly to remove any debris or oils. 2. Precisely cut the sheet to the required dimensions for your pneumatic component using appropriate cutting tools. 3. Deburr all cut edges to prevent material fatigue and ensure proper sealing surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during cutting, leading to material deformation. | Utilize sharp, high-quality cutting tools and apply steady, controlled pressure to achieve clean cuts without stress on the brass. |
| Failure to deburr edges, causing potential leaks or component failure. | Always meticulously deburr all cut edges using a deburring tool to create smooth, clean surfaces crucial for sealing and integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom pneumatic fittings and connectors, Valve body fabrication, Manifold block construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||