This premium brass stock sheet, measuring 0.077" thick by 13" wide and 23" long, offers exceptional durability and corrosion resistance. Ideal for custom pneumatic component fabrication and repairs in demanding industrial settings.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.077" |
| Length | 13" |
| Width | 23" |
A proven choice for industrial professionals, this brass stock sheet offers superior machinability and excellent resistance to common pneumatic media and environmental factors. Its 0.077" thickness provides a robust foundation for fabricating custom fittings, manifolds, and structural components within pneumatic systems. The inherent properties of brass ensure reliable performance, minimizing the risk of leaks and failure under pressure. This sheet is engineered to meet the stringent demands of industrial pneumatics, delivering consistent results for a wide range of applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired dimensions on the brass stock sheet using a metal scribe. 2. Employ appropriate cutting tools (e.g., shear, band saw) to achieve precise cuts, ensuring clean edges. 3. Deburr all cut edges thoroughly to prevent burrs from compromising seal integrity or causing damage to other components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for metal, leading to rough edges and potential material deformation. | Utilize metal-specific cutting blades and tools, such as a metal-cutting band saw, abrasive chop saw, or a precision shear, to ensure clean and accurate cuts. |
| Failing to deburr cut edges, leaving sharp burrs that can damage seals or lead to safety hazards. | Always use a deburring tool or a fine-grit file to remove all sharp edges and burrs from the cut surfaces after fabrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom pneumatic fitting fabrication, Manifold plate construction, Repair of pneumatic enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||