This high-grade brass stock sheet is engineered for demanding pneumatic applications. Its robust composition ensures reliability and longevity in various industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.634" |
| Length | 34" |
| Width | 25" |
A high-performance industrial component, this brass stock sheet offers superior machinability and excellent corrosion resistance, critical for pneumatic system integrity. With precise dimensions of 0.634 inches (16.10 mm) thickness, 34 inches (863.6 mm) length, and 25 inches (635 mm) width, it is ideal for fabricating custom pneumatic manifolds, valve bodies, and connectors. The material's inherent strength and durability make it suitable for moderate pressure applications, ensuring consistent performance and preventing premature wear. Its brass composition also offers good electrical conductivity if required for certain integrated systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before cutting or machining. 2. Utilize appropriate cutting and shaping tools designed for brass. 3. Deburr all edges thoroughly after fabrication to prevent potential pneumatic leaks.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to burring and poor edge quality. | Employ sharp, high-quality tooling specifically designed for brass to achieve clean cuts and minimize burr formation. |
| Failing to properly deburr fabricated components, risking leaks in pneumatic circuits. | Always meticulously deburr all machined edges and internal passages to ensure a perfect seal within the pneumatic system. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic Manifold Fabrication, Custom Valve Body Machining, Pneumatic Connector Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||