This premium brass stock sheet, engineered to exacting standards, provides superior performance and longevity for critical pneumatic components. Its robust composition ensures reliability in demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.524" |
| Length | 43" |
| Width | 21" |
Specified by design engineers worldwide, this brass stock sheet is manufactured from a high-tensile naval brass alloy, offering exceptional strength and corrosion resistance crucial for pneumatic applications. The precise dimensions of 0.524 inches (13.31 mm) thickness, 43 inches (1092.2 mm) length, and 21 inches (533.4 mm) width allow for the fabrication of robust pneumatic manifold blocks, valve bodies, and fittings. This material exhibits excellent machinability, facilitating intricate component designs while maintaining structural integrity under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately cut the brass stock sheet to the required component dimensions using appropriate metalworking equipment. 2. Machine the cut stock to precise tolerances for manifold channels, ports, and mounting features. 3. Deburr all machined edges and surfaces to prevent particle contamination within the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly specified brass for pneumatic manifolds. | Always adhere to the specified material grade and dimensions to ensure adequate pressure handling and component longevity. |
| Inadequate deburring of machined components leading to system contamination. | Thoroughly deburr all machined surfaces and passages to prevent particulate ingress into the pneumatic circuit. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic Manifold Blocks, Valve Bodies, Pneumatic Fittings & Connectors, Pressure Regulators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||