This premium brass stock sheet is engineered for the rigorous demands of pneumatic systems. Its robust composition and precise dimensions ensure reliable performance and longevity in critical applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.619" |
| Length | 13" |
| Width | 19" |
Built to exacting engineering tolerances, this 0.619" thick brass stock sheet offers exceptional dimensional stability for critical pneumatic components. Composed of UNS C26000 cartridge brass (70% copper, 30% zinc), it exhibits superior corrosion resistance against common industrial fluids and gases, along with excellent machinability for custom fabrication. Its inherent strength and non-sparking properties make it ideal for a wide range of pneumatic manifold designs, valve bodies, and pressure vessel components operating under moderate to high pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface integrity prior to cutting. 2. Utilize appropriate cutting tools (e.g., waterjet, laser, or precision saw) for the specified dimensions. 3. Deburr all cut edges thoroughly to prevent particle generation within pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate edge preparation after cutting. | Ensure all cut edges are meticulously deburred using appropriate tools to prevent contamination of pneumatic lines. |
| Using incorrect machining parameters leading to excessive heat generation. | Employ recommended machining speeds and lubrication for brass to avoid material degradation and maintain dimensional accuracy. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic Manifold Fabrication, Custom Valve Body Machining, Pressure Vessel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||