This brass stock sheet, engineered for pneumatic systems, offers superior machinability and corrosion resistance. Its precise dimensions ensure optimal performance and longevity in critical fluid power applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.137" |
| Length | 25" |
| Width | 24" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.137 inches in thickness, 25 inches in length, and 24 inches in width. Composed of a high-copper alloy, it exhibits excellent machinability, good thermal and electrical conductivity, and robust corrosion resistance, making it ideal for fabricating custom pneumatic components like valve bodies, fittings, and manifold blocks. The material's inherent strength and ductility allow for intricate designs and reliable sealing under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and well-lit. 2. Accurately measure and mark the required dimensions on the brass stock sheet for cutting. 3. Carefully cut the sheet using appropriate tools (e.g., shear, saw) to the marked dimensions, ensuring clean edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or poorly cut components. | Always double-check measurements and ensure cuts are precise and edges are clean for proper sealing and component fit. |
| Improper material selection for specific pneumatic pressures. | While brass is suitable for many applications, verify its tensile strength and pressure rating against your system's requirements. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom pneumatic valve fabrication, Manifold block construction, Pneumatic fitting manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||