This premium brass stock sheet is engineered for critical pneumatic systems requiring superior material integrity. Its specific dimensions and brass composition ensure optimal performance and longevity in challenging environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.783" |
| Length | 23" |
| Width | 27" |
Precision-manufactured to tight tolerances, this brass stock sheet boasts a thickness of 0.783 inches, a length of 23 inches, and a width of 27 inches. Composed of high-grade brass (specific alloy designation available upon request), it exhibits excellent machinability, good corrosion resistance, and high thermal conductivity, making it ideal for custom pneumatic component fabrication. The material's inherent properties ensure reliable sealing and structural integrity under pressure, preventing leaks and ensuring operational efficiency in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of debris. Verify dimensions against design specifications. 2. Utilize appropriate cutting and shaping tools designed for brass to achieve precise component geometries. 3. Apply suitable lubrication during machining to prevent tool wear and ensure smooth surface finishes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for brass, leading to poor edge quality. | Employ carbide or HSS tooling specifically designed for machining non-ferrous metals like brass, ensuring proper speeds and feeds. |
| Failure to account for thermal expansion during machining or assembly, causing dimensional inaccuracies. | Allow for adequate cooling periods during high-speed machining and consider the operating temperature range of the final pneumatic component. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom pneumatic valve bodies, Cylinder end caps and components, Pneumatic manifold blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||