This robust brass stock sheet is engineered for high-performance pneumatic systems. Its superior material properties ensure longevity and reliability in critical industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.847" |
| Length | 41" |
| Width | 30" |
Manufactured under strict quality controls, this brass stock sheet boasts a precise thickness of 0.847 inches, a substantial length of 41 inches, and a width of 30 inches. The inherent machinability and corrosion resistance of brass make it ideal for fabricating custom pneumatic components, valves, fittings, and manifold blocks. Its dimensional stability and strength ensure consistent performance under pressure, making it a preferred material for critical air and fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the working area is clean and free of debris. 2. Accurately measure and cut the brass sheet to the required dimensions for the component. 3. Machine or form the brass according to the pneumatic component design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or deformation. | Employ sharp, dedicated metal cutting tools and appropriate speeds for brass to ensure clean edges. |
| Inadequate deburring after cutting or machining. | Thoroughly deburr all cut edges and machined surfaces to prevent potential leaks or component interference. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic Valve Bodies, Custom Fittings and Connectors, Manifold Blocks and Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||