This brass stock sheet is engineered for demanding pneumatic systems, offering superior machinability and corrosion resistance. Its precise dimensions ensure seamless integration into custom fabrication projects, delivering reliable performance.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.258" |
| Length | 39" |
| Width | 26" |
Precision-manufactured to tight tolerances, this brass stock sheet measures 0.258 inches thick, 39 inches in length, and 26 inches in width. Composed of a high-copper alloy, it exhibits excellent machinability, good corrosion resistance against many common industrial fluids, and high thermal conductivity, making it ideal for fabricating custom pneumatic fittings, valve bodies, manifold blocks, and pressure vessel components. The material's inherent strength and non-sparking properties are critical in environments where safety is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication design accounts for brass's specific machining characteristics. 2. Cut the stock sheet to the required dimensions using appropriate tooling. 3. Machine the component, adhering to thread standards and surface finish requirements for pneumatic seals.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for brass, leading to poor edge quality or tool damage. | Utilize sharp, high-speed steel or carbide tooling specifically designed for machining non-ferrous metals like brass. |
| Over-machining or improper heat treatment which can alter brass's mechanical properties. | Follow recommended machining parameters and avoid excessive heat generation; annealing is generally not required for standard pneumatic component fabrication from this stock. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom pneumatic fittings and connectors, Manifold blocks for pneumatic control systems, Valve bodies and components for pneumatic actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||