This premium brass stock sheet is engineered for demanding pneumatic systems. Its precise dimensions and superior material properties ensure reliable performance in critical applications requiring durability and corrosion resistance.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.135" |
| Length | 22" |
| Width | 16" |
Specified by design engineers worldwide, this brass stock sheet offers exceptional machinability and corrosion resistance, crucial for pneumatic component fabrication. With a thickness of 0.135 inches, a length of 22 inches, and a width of 16 inches, it provides ample material for crafting intricate fittings, valve bodies, and manifold plates. The inherent properties of brass, including its good conductivity and non-sparking nature, make it ideal for environments where safety and operational integrity are paramount in pneumatic circuitry.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before machining. 2. Utilize appropriate cutting and shaping tools designed for brass. 3. Deburr all edges thoroughly after fabrication to prevent particulate contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication, leading to tool wear and poor cut quality. | Employ high-speed steel or carbide cutting tools with a sulfurized cutting oil to maintain sharpness and ensure clean cuts in brass. |
| Over-machining, causing excessive heat build-up which can alter material properties. | Employ moderate cutting speeds and feed rates with adequate cooling to prevent thermal degradation of the brass. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic valve bodies, Air cylinder components, Pneumatic fittings and connectors, Manifold blocks for pneumatic control.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||