This brass stock sheet is a premium material for pneumatic systems. Its excellent machinability and corrosion resistance ensure longevity and optimal performance in demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.109" |
| Length | 42" |
| Width | 27" |
Engineered for reliability and performance, this brass stock sheet is specifically selected for its suitability in pneumatic applications. With a precise thickness of 0.109 inches, a substantial length of 42 inches, and a generous width of 27 inches, it offers ample material for fabrication. Brass provides inherent corrosion resistance, excellent thermal conductivity, and good machinability, making it ideal for components such as valve bodies, fittings, and manifold blocks within pneumatic systems where consistent operation and resistance to atmospheric or fluid-borne contaminants are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the brass sheet to the required dimensions for your pneumatic component using appropriate metalworking tools. 2. Machine the cut material to create the desired pneumatic part, ensuring tight tolerances for sealing. 3. Deburr all edges thoroughly to prevent particle generation within the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient thickness for high-pressure pneumatic applications. | Verify the required pressure rating of your pneumatic system and select a brass stock sheet with adequate thickness to withstand these pressures safely. |
| Failing to properly deburr machined edges, leading to potential contamination. | Always meticulously deburr all edges after cutting and machining to prevent loose particles from entering the pneumatic circuit. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pneumatic Valve Bodies, Pneumatic Fittings and Connectors, Pneumatic Manifold Blocks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||