This brass stock sheet is engineered for demanding pneumatic systems. Its precise dimensions and durable brass composition ensure reliable performance in a variety of industrial fluid power applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.083" |
| Length | 20" |
| Width | 32" |
Built to exacting engineering tolerances, this 0.083" thick brass stock sheet offers superior machinability and excellent corrosion resistance, crucial for pneumatic component fabrication. Measuring 20" in length and 32" in width, it provides ample material for producing custom fittings, manifolds, valve bodies, and other intricate parts that require dimensional stability and chemical inertness within pneumatic circuits. The inherent properties of brass ensure consistent performance and longevity in moderate pressure and temperature environments common in pneumatic operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass sheet is clean and free of debris. 2. Precisely cut to the required dimensions using appropriate tooling. 3. Machine components according to design specifications, ensuring tight tolerances for pneumatic seals.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient material thickness for pressure requirements. | Always verify the required material thickness against the maximum operating pressure of the pneumatic system. |
| Inadequate surface preparation before machining, leading to poor finishes. | Thoroughly clean and deburr the brass sheet to ensure a smooth surface for machining. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom pneumatic fittings and connectors, Manifold blocks for pneumatic control systems, Valve bodies and internal components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||