Engineered for demanding pneumatic systems, this brass stock sheet offers superior machinability and corrosion resistance. Its robust construction ensures reliable performance in a variety of industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.322" |
| Length | 26" |
| Width | 26" |
Built to exacting engineering tolerances, this 0.322-inch thick brass stock sheet measures 26 inches in length and 26 inches in width. Crafted from high-grade brass (e.g., UNS C36000 or equivalent), it exhibits excellent machinability, good thermal and electrical conductivity, and inherent corrosion resistance, making it ideal for fabricating custom pneumatic components such as valve bodies, fittings, actuators, and manifold blocks where precise dimensions and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure material is clean and free of debris. 2. Fabricate components according to design specifications. 3. Integrate fabricated parts into the pneumatic system, ensuring proper sealing and connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect brass alloy for specific pressure or fluid compatibility needs. | Verify the brass alloy's suitability for the intended pneumatic medium and operating pressures. Consult material data sheets for chemical resistance and mechanical strength. |
| Inadequate surface preparation before sealing or joining components. | Thoroughly clean and deburr all mating surfaces to ensure a leak-free pneumatic connection. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Pneumatic Valve Components, Pneumatic Fitting Fabrication, Manifold Block Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||