This premium brass stock sheet is engineered for demanding lubrication applications. Its precise dimensions and inherent material properties ensure optimal performance in reducing friction and wear in critical machinery.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.076" |
| Length | 22" |
| Width | 21" |
A high-performance industrial component, this brass stock sheet measures 0.076 inches in thickness, with a generous length of 22 inches and a width of 21 inches. Crafted from brass, a material renowned for its inherent lubricity and excellent machinability, it is ideally suited for applications where low friction and wear resistance are paramount. The alloy composition provides a balance of strength and ductility, allowing for intricate shaping and reliable performance under moderate load and temperature conditions, making it an essential material for custom bearing surfaces and sliding components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free of contaminants. 2. Carefully cut or machine the brass sheet to the required dimensions for the component. 3. Securely fasten the fabricated brass component using appropriate industrial fasteners or adhesives, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a thickness less than specified for the application's load-bearing requirements. | Always verify the required sheet thickness based on the anticipated operational loads and consult material strength data. |
| Failing to properly deburr and smooth edges after cutting, which can lead to premature wear. | Thoroughly deburr and polish all cut edges to a smooth finish to prevent abrasive wear on mating surfaces. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom bearing liners, Wear plates for sliding mechanisms, Lubricated wear strips in machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||