This brass stock sheet, engineered for lubricating applications, offers exceptional low-friction properties. Its precise dimensions and material composition make it ideal for reducing wear and enhancing the performance of moving components.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.015" |
| Length | 29" |
| Width | 14" |
Trusted by engineers across multiple sectors, this brass stock sheet delivers superior performance in lubricating applications. With a precise thickness of 0.015 inches, a length of 29 inches, and a width of 14 inches, it offers ample material for custom fabrication. The inherent properties of brass, including its low coefficient of friction and excellent machinability, make it a reliable choice for reducing wear and preventing galling in sliding mechanisms, bearings, and other friction-prone interfaces. Its resistance to corrosion further ensures longevity in diverse operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any contaminants. 2. Precisely cut the brass stock sheet to the required dimensions for the specific application. 3. Securely install the fabricated brass component, ensuring proper alignment and contact with the mating surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect thickness for the application's load-bearing requirements. | Consult engineering drawings or perform load calculations to ensure the 0.015" thickness is adequate for the intended use. |
| Inadequate surface preparation before installation, leading to premature wear. | Thoroughly degrease and deburr all mating surfaces to ensure optimal contact and lubrication effectiveness. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Sliding mechanisms, Wear plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||