This brass stock sheet is engineered for demanding lubricating applications. Its inherent properties provide a reliable, low-friction surface ideal for reducing wear and extending the life of moving components in industrial machinery.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.035" |
| Length | 30" |
| Width | 21" |
A proven choice for industrial professionals, this brass stock sheet is manufactured to precise dimensions of 0.035 inches in thickness, 30 inches in length, and 21 inches in width. Composed of high-grade brass, it exhibits excellent machinability and inherent self-lubricating characteristics, crucial for minimizing friction and wear in bearing surfaces, sliding components, and wear plates. The material's composition ensures good corrosion resistance and thermal conductivity, making it suitable for diverse operating environments where consistent lubrication is paramount for operational efficiency and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface to which the brass sheet will be applied is clean, dry, and free of debris. 2. Cut the brass sheet to the required dimensions using appropriate metal-cutting tools. 3. Secure the brass sheet to the substrate using recommended fasteners or adhesives, ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong cutting tool, leading to burrs or an imprecise cut. | Utilize sharp, high-quality metal-cutting blades specifically designed for brass to achieve clean, accurate edges. |
| Inadequate surface preparation before installation, resulting in poor adhesion or premature wear. | Thoroughly degrease and clean both the brass sheet and the mounting surface to ensure optimal contact and performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear plates for sliding mechanisms, Self-lubricating bearings, Bushings and sleeve bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||