This premium brass stock sheet offers exceptional wear resistance and self-lubricating properties, making it the ideal choice for critical components in high-stress industrial applications where friction reduction is paramount.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.456" |
| Length | 19" |
| Width | 46" |
Designed for demanding industrial environments, this brass stock sheet boasts a thickness of 0.456 inches, a length of 19 inches, and a width of 46 inches. Its inherent material properties, including excellent machinability and corrosion resistance, coupled with a naturally low coefficient of friction, make it supremely suited for applications requiring consistent lubrication and minimal wear. This includes the fabrication of bearing surfaces, sliding components, and specialized wear pads within heavy machinery and automated systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component to the intended application area, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that can gall or corrode with brass. | Utilize stainless steel or specialized coated fasteners to prevent galvanic corrosion and ensure long-term integrity. |
| Over-machining, leading to excessive material removal and compromised structural integrity. | Adhere strictly to design tolerances and employ appropriate cutting speeds and feed rates for brass to maintain dimensional accuracy. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings and bushings, Wear plates and sliding guides, Gears and sprockets in low-speed, high-load environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||