This brass stock sheet is engineered for superior lubricity. Its composition offers excellent wear resistance and self-lubricating properties, making it ideal for demanding sliding or bearing applications where friction reduction is critical.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.071" |
| Length | 20" |
| Width | 14" |
Manufactured under strict quality controls, this brass stock sheet boasts a precise thickness of 0.071 inches, a generous length of 20 inches, and a width of 14 inches. The inherent properties of brass, including its moderate strength, ductility, and excellent corrosion resistance, combined with its natural lubricity, make it an optimal material for components subjected to friction and wear. It is suitable for use in a wide range of operating temperatures and environments where maintaining low friction is paramount for efficient operation and extended component life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly before application. 2. Cut the brass sheet to the required dimensions using appropriate tools. 3. Securely fasten the sheet to the substrate using recommended industrial adhesives or mechanical fasteners, ensuring flush contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using abrasive cleaning agents that can scratch the surface and reduce lubricity. | Utilize non-abrasive, industrial-grade cleaning solutions specifically designed for metal surfaces. |
| Improperly securing the sheet, leading to movement and potential wear. | Ensure all fasteners are tightened to the manufacturer's recommended torque and that adhesives have fully cured before operational use. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Wear strips, Low-friction guides, Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||