This premium brass stock sheet is engineered for demanding lubricating applications. Its inherent properties ensure superior wear resistance and smooth operational performance, making it ideal for critical components.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.966" |
| Length | 38" |
| Width | 47" |
Specified by design engineers worldwide, this brass stock sheet (0.966" thickness, 38" width, 47" length) offers exceptional self-lubricating characteristics due to its copper-lead or graphite-infused alloy composition. Its excellent machinability allows for precise fabrication of intricate parts, while its inherent corrosion resistance ensures longevity in harsh environments. This material is ideal for bushings, bearings, and wear pads where reduced friction and extended service life are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of contaminants. 2. Precisely machine the brass stock to required dimensions. 3. Install components ensuring proper alignment and lubrication where applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect grade of brass for specific load requirements. | Consult material datasheets to select a brass alloy with appropriate load-bearing and wear resistance properties for the intended application. |
| Insufficient lubrication during initial run-in period. | Apply a suitable lubricant during the initial start-up phase to ensure proper mating of surfaces and to prevent premature wear. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings, Wear plates and pads, Journal bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||