This brass stock sheet is engineered for exceptional lubricating properties. Its composition and dimensions make it ideal for applications requiring low friction, wear resistance, and excellent machinability, ensuring optimal performance and longevity.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.947" |
| Length | 39" |
| Width | 38" |
Precision-manufactured to tight tolerances, this brass stock sheet boasts a thickness of 0.947 inches, a length of 39 inches, and a width of 38 inches. Its inherent self-lubricating characteristics, derived from its brass composition, significantly reduce friction and wear in moving parts. This material exhibits excellent corrosion resistance and good thermal conductivity, making it suitable for dynamic components and environments where heat dissipation is a concern. The precise dimensions ensure seamless integration into complex machinery and precise fabrication of custom parts, meeting stringent industrial standards.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to remove any debris or contaminants. 2. Position the brass stock sheet according to design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fastening methods such as machining, bonding, or mechanical fasteners, depending on the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation prior to installation. | Ensure the mounting surface is meticulously cleaned and free of any oils, grease, or particulate matter to guarantee optimal adhesion and performance. |
| Using incorrect fastening methods that can compromise structural integrity. | Consult engineering drawings and material compatibility charts to select the most suitable and secure fastening method for the specific application. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Wear plates, Slide guides, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||