This premium brass stock sheet is engineered for superior performance in lubricating applications. Its specific composition provides excellent bearing properties, reducing friction and wear in demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.934" |
| Length | 30" |
| Width | 46" |
Precision-manufactured to tight tolerances, this brass stock sheet boasts a thickness of 0.934 inches, a length of 30 inches, and a width of 46 inches. Composed of a specific brass alloy, it exhibits exceptional inherent lubricity and excellent machinability, making it suitable for custom bearing surfaces, wear plates, and components subjected to high friction. Its thermal conductivity also aids in heat dissipation. This material is ideal for applications where a self-lubricating or low-friction surface is critical for operational efficiency and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free from contaminants. 2. Carefully position the brass stock sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, such as mechanical fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or misalignment. | Thoroughly clean and degrease both the substrate and the brass sheet before installation. |
| Over-tightening fasteners, which can distort the sheet and compromise its lubricating properties. | Use calibrated torque tools and follow recommended torque values for fasteners to avoid deformation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom bearing surfaces, Wear plates in machinery, Components requiring reduced friction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||